Linux系统常见磁盘扩容操作
一、准备工作：获取目标磁盘信息
（1）确认分区表格式和文件系统
运行以下命令确认数据盘的分区表格式
[root@localhost ~]# fdisk -lu /dev/sdb
磁盘 /dev/sdb：10.7 GB, 10737418240 字节，20971520 个扇区
Units = 扇区 of 1 * 512 = 512 bytes
扇区大小(逻辑/物理)：512 字节 / 512 字节
I/O 大小(最小/最佳)：512 字节 / 512 字节
磁盘标签类型：dos
磁盘标识符：0x9bf79a39
设备 Boot Start End Blocks Id System
/dev/sdb1 2048 20971519 10484736 83 Linux注意:
Disk label type的值为dos则分区是MBR，若该结果的值为gpt则分区是GPT
运行以下命令确认已有分区的文件系统类型
[root@localhost ~]# blkid /dev/sdb1
/dev/sdb1: UUID="a01cf440-2a96-4378-830a-82487fee0d87" TYPE="ext4" 注意:
TYPE的值为ext4则文件系统类型为ext4，若该结果的值为xfs则文件系统类型为xfs
ext文件系统使用resize2fs命令扩容文件系统
xfs文件系统使用 xfs_growfs命令扩容文件系统
说明
为了防止数据丢失，不建议扩容已挂载的分区和文件系统。请先取消挂载（umount）分区，完成扩容并正常使用后，重新挂载（mount）。针对不同的Linux内核版本，推荐以下操作方式：
实例内核版本小于3.6：先取消挂载该分区，再修改分区表，最后扩容文件系统。
实例内核版本大于等于3.6：先修改对应分区表，再通知内核更新分区表，最后扩容文件系统。
二、扩容已有MBR分区
fdisk命令主要用于 MBR分区表的操作
MBR：MBR 分区表支持最多四个主分区，其中一个可以是扩展分区，该扩展分区可以包含多个逻辑分区。由于 MBR 使用32位的扇区偏移值来寻址，因此 MBR 分区表的最大容量为2 TB
（1）分区后扩容
/dev/sdb有10G，只有一个分区/dev/sdb1。将其扩大至20G，将新增的10G划分至已有的/dev/sdb1内
以ext4文件系统为例
[root@localhost ~]# df -Th
文件系统 类型 容量 已用 可用 已用% 挂载点
devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs tmpfs 1.9G 8.9M 1.9G 1% /run
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/mapper/centos-root xfs 36G 4.9G 31G 14% /
/dev/sda1 xfs 1014M 150M 865M 15% /boot
tmpfs tmpfs 379M 0 379M 0% /run/user/0
/dev/sdb1 ext4 9.8G 37M 9.2G 1% /www执行以下命令，安装growpart扩容工具
[root@localhost ~]# yum install cloud-utils-growpart -y
#如果数据盘扩容后容量大小未变执行此命令让内核扫描并重新识别连接到sdb磁盘的所有磁盘驱动器
[root@localhost ~]# echo 1 > /sys/block/sdb/device/rescan
[root@localhost ~]# growpart /dev/sdb 1
[root@localhost ~]# resize2fs /dev/sdb1
[root@localhost ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs tmpfs 1.9G 12M 1.9G 1% /run
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/mapper/centos-root xfs 53G 3.2G 50G 6% /
/dev/sda1 xfs 797M 151M 647M 19% /boot
tmpfs tmpfs 378M 0 378M 0% /run/user/0
/dev/sdb1 ext4 20G 44M 19G 1% /data如果不使用growpart命令 手动扩容如下
[root@localhost ~]# fdisk /dev/sdb
Command (m for help): p #查看分区
Command (m for help): d #删除当前1分区 切记不要w保存退出 会造成数据丢失
Command (m for help): n #选择分区类型
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p #选择主分区
Partition number (1-4, default 1):
First sector (2048-41943039, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-41943039, default 41943039):
Using default value 41943039
Partition 1 of type Linux and of size 20 GiB is set
Command (m for help): p
Disk /dev/sdb: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x2e714d05
Device Boot Start End Blocks Id System
/dev/sdb1 2048 41943039 20970496 83 Linux
Command (m for help): w #以上操作保存退出 如果中途命令输入错误 ctrl+c回退所有命令 重头再开始
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
[root@localhost ~]# partprobe
[root@localhost ~]# resize2fs /dev/sdb1
resize2fs 1.42.9 (28-Dec-2013)
Filesystem at /dev/sdb1 is mounted on /data; on-line resizing required
old_desc_blocks = 2, new_desc_blocks = 3
The filesystem on /dev/sdb1 is now 5242624 blocks long.
# 再次查看是否升级成功
[root@localhost ~]# df -Th
以xfs文件系统为例
# 查看分区大小以及文件系统类型
df -Th执行以下命令，安装growpart扩容工具
yum install cloud-utils-growpart -y
#如果数据盘扩容后容量大小未变执行此命令让内核扫描并重新识别连接到sdb磁盘的所有磁盘驱动器
echo 1 > /sys/block/sdb/device/rescan
growpart /dev/sdb 1
xfs_growfs /dev/sdb1
# 再次查看是否升级成功
df -Th如果不使用growpart命令 手动扩容如下
fdisk /dev/sdb
Command (m for help): p #打印分区表
Command (m for help): d #删除分区
Command (m for help): n #选择主分区
Select (default p): p #默认选择primary
Partition number (1-4, default 1): #默认选择1
First sector (2048-41943039, default 2048):
Command (m for help): p
Command (m for help): w #保存修改并退出
partprobe
xfs_growfs /dev/sdb1
# 再次查看是否升级成功
df -Th三、扩容已有GPT分区
parted命令主要用于 GPT分区表的操作
GPT：GPT 分区表支持更大的硬盘容量。它使用64位的逻辑块地址，因此可以支持超过2 TB的硬盘容量
（1）分区后扩容
以ext4文件系统为例
/dev/sdf1有10G。将数据盘容量扩大至20G，将新增的10G划分至已有的/dev/sdf1内
df -Th
parted /dev/sdf
(parted) print
Error: The backup GPT table is not at the end of the disk, as it should be. This might mean that another operating system believes the
disk is smaller. Fix, by moving the backup to the end (and removing the old backup)?
Fix/Ignore/Cancel? Fix #若界面提示Fix/Ignore/Cancel?和Fix/Ignore?，均输入Fix即可
Warning: Not all of the space available to /dev/sdf appears to be used, you can fix the GPT to use all of the space (an extra 20971520
blocks) or continue with the current setting?
Fix/Ignore? Fix
Model: VMware Virtual disk (scsi)
Disk /dev/sdf: 21.5GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 1049kB 10.7GB 10.7GB ext4 primary
(parted) rm 1 #删除1分区
(parted) mkpart primary 1049kB 100% #原分区的起始扇区为1049kB，且要将扩容后的总容量全部分配给该分区
(parted) print
Model: VMware Virtual disk (scsi)
Disk /dev/sdf: 21.5GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 1049kB 21.5GB 21.5GB ext4 primary
(parted) quit #退出
Information: You may need to update /etc/fstab.
[root@localhost ~]# resize2fs /dev/sdf1
resize2fs 1.42.9 (28-Dec-2013)
Please run 'e2fsck -f /dev/sdf1' first.
[root@localhost ~]# e2fsck -f /dev/sdf1 #检测磁盘
e2fsck 1.42.9 (28-Dec-2013)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/sdf1: 11/655360 files (0.0% non-contiguous), 83137/2620928 blocks
[root@localhost ~]# resize2fs /dev/sdf1
resize2fs 1.42.9 (28-Dec-2013)
Resizing the filesystem on /dev/sdf1 to 5242368 (4k) blocks.
The filesystem on /dev/sdf1 is now 5242368 blocks long.
[root@localhost ~]# mount /dev/sdf1 /aaa
[root@localhost ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs tmpfs 1.9G 20M 1.9G 2% /run
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/mapper/centos-root xfs 53G 3.2G 50G 6% /
/dev/sda1 xfs 797M 151M 647M 19% /boot
tmpfs tmpfs 378M 0 378M 0% /run/user/0
/dev/mapper/vgdata-lvdata ext4 689G 69M 658G 1% /data
/dev/sdf1 ext4 20G 44M 19G 1% /aaa以xfs文件系统为例
[root@localhost ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs tmpfs 1.9G 20M 1.9G 2% /run
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/mapper/centos-root xfs 53G 3.2G 50G 6% /
/dev/sda1 xfs 797M 151M 647M 19% /boot
tmpfs tmpfs 378M 0 378M 0% /run/user/0
/dev/mapper/vgdata-lvdata ext4 689G 69M 658G 1% /data
/dev/sdf1 xfs 10G 33M 10G 1% /aaa
[root@localhost ~]# parted /dev/sdf
GNU Parted 3.1
Using /dev/sdf
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) print
Error: The backup GPT table is not at the end of the disk, as it should be. This might mean that another operating system believes the
disk is smaller. Fix, by moving the backup to the end (and removing the old backup)?
Fix/Ignore/Cancel? fix
Warning: Not all of the space available to /dev/sdf appears to be used, you can fix the GPT to use all of the space (an extra 20971520
blocks) or continue with the current setting?
Fix/Ignore? fix
Model: VMware Virtual disk (scsi)
Disk /dev/sdf: 21.5GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 1049kB 10.7GB 10.7GB xfs primary
(parted) rm 1
(parted) mkpart primary 1049kB 100%
(parted) print
Model: VMware Virtual disk (scsi)
Disk /dev/sdf: 21.5GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 1049kB 21.5GB 21.5GB xfs primary
(parted) quit
Information: You may need to update /etc/fstab.
[root@localhost ~]# mount /dev/sdf1 /aaa
[root@localhost ~]# xfs_growfs /aaa
meta-data=/dev/sdf1 isize=512 agcount=4, agsize=655232 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=0 spinodes=0
data = bsize=4096 blocks=2620928, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
data blocks changed from 2620928 to 5242368
[root@localhost ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs tmpfs 1.9G 20M 1.9G 2% /run
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/mapper/centos-root xfs 53G 3.2G 50G 6% /
/dev/sda1 xfs 797M 151M 647M 19% /boot
tmpfs tmpfs 378M 0 378M 0% /run/user/0
/dev/mapper/vgdata-lvdata ext4 689G 69M 658G 1% /data
/dev/sdf1 xfs 20G 33M 20G 1% /aaa
[root@localhost ~]#四、未分区扩容
/dev/sdb有10G，未分区直接挂载。将数据盘容量扩大至20G，将新增的10G划分至已有的/dev/sdb内
以ext4文件系统为例
[root@localhost ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs tmpfs 1.9G 12M 1.9G 1% /run
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/mapper/centos-root xfs 53G 3.2G 50G 6% /
/dev/sda1 xfs 797M 151M 647M 19% /boot
tmpfs tmpfs 378M 0 378M 0% /run/user/0
/dev/sdb ext4 9.8G 37M 9.2G 1% /data
[root@localhost ~]# echo 1 > /sys/block/sdb/device/rescan
[root@localhost ~]# resize2fs /dev/sdb
resize2fs 1.42.9 (28-Dec-2013)
Filesystem at /dev/sdb is mounted on /data; on-line resizing required
old_desc_blocks = 2, new_desc_blocks = 3
The filesystem on /dev/sdb is now 5242880 blocks long.
[root@localhost ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs tmpfs 1.9G 12M 1.9G 1% /run
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/mapper/centos-root xfs 53G 3.2G 50G 6% /
/dev/sda1 xfs 797M 151M 647M 19% /boot
tmpfs tmpfs 378M 0 378M 0% /run/user/0
/dev/sdb ext4 20G 44M 19G 1% /data以xfs文件系统为例
[root@localhost ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs tmpfs 1.9G 12M 1.9G 1% /run
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/mapper/centos-root xfs 53G 3.2G 50G 6% /
/dev/sda1 xfs 797M 151M 647M 19% /boot
tmpfs tmpfs 378M 0 378M 0% /run/user/0
/dev/sdb xfs 9.8G 37M 9.2G 1% /data
[root@localhost ~]# echo 1 > /sys/block/sdb/device/rescan
[root@localhost ~]# xfs_growfs /dev/sdb
[root@localhost ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs tmpfs 1.9G 12M 1.9G 1% /run
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/mapper/centos-root xfs 53G 3.2G 50G 6% /
/dev/sda1 xfs 797M 151M 647M 19% /boot
tmpfs tmpfs 378M 0 378M 0% /run/user/0
/dev/sdb xfs 20G 44M 19G 1% /data五、LVM
（1）通过LVM创建逻辑卷
三块大小为100G的磁盘，通过LVM创建逻辑卷并挂载目录
ext为例
[root@localhost ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 55G 0 disk
├─sda1 8:1 0 800M 0 part /boot
├─sda2 8:2 0 39.2G 0 part
│ ├─centos-root 253:0 0 52.2G 0 lvm /
│ └─centos-swap 253:1 0 2G 0 lvm [SWAP]
├─sda3 8:3 0 5G 0 part
│ └─centos-root 253:0 0 52.2G 0 lvm /
└─sda4 8:4 0 10G 0 part
└─centos-root 253:0 0 52.2G 0 lvm /
sdb 8:16 0 100G 0 disk
sdc 8:32 0 100G 0 disk
sdd 8:48 0 100G 0 disk
sr0 11:0 1 1024M 0 rom
[root@localhost ~]# pvcreate /dev/sdb
Physical volume "/dev/sdb" successfully created.
[root@localhost ~]# pvcreate /dev/sdc
Physical volume "/dev/sdc" successfully created.
[root@localhost ~]# pvcreate /dev/sdd
Physical volume "/dev/sdd" successfully created.
[root@localhost ~]# vgcreate vgdata /dev/sdb
Volume group "vgdata" successfully created
[root@localhost ~]# vgs
VG #PV #LV #SN Attr VSize VFree
centos 3 2 0 wz--n- <54.21g 0
vgdata 1 0 0 wz--n- <100.00g <100.00g
[root@localhost ~]# vgextend vgdata /dev/sdc
Volume group "vgdata" successfully extended
[root@localhost ~]# vgextend vgdata /dev/sdd
Volume group "vgdata" successfully extended
[root@localhost ~]# vgs
VG #PV #LV #SN Attr VSize VFree
centos 3 2 0 wz--n- <54.21g 0
vgdata 3 0 0 wz--n- <299.99g <299.99g
[root@localhost ~]# lvcreate -l 100%FREE -n lvdata vgdata
Logical volume "lvdata" created.
[root@localhost ~]# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
root centos -wi-ao---- <52.21g
swap centos -wi-ao---- 2.00g
lvdata vgdata -wi-a----- <299.99g
[root@localhost ~]# mkfs -t ext4 /dev/vgdata/lvdata
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
19660800 inodes, 78640128 blocks
3932006 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=2227175424
2400 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872, 71663616
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
[root@localhost ~]# mount /dev/vgdata/lvdata /data
[root@localhost ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs tmpfs 1.9G 12M 1.9G 1% /run
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/mapper/centos-root xfs 53G 3.2G 50G 6% /
/dev/sda1 xfs 797M 151M 647M 19% /boot
tmpfs tmpfs 378M 0 378M 0% /run/user/0
/dev/mapper/vgdata-lvdata ext4 296G 65M 281G 1% /data
[root@localhost ~]# vim /etc/fstab #末尾添加
/dev/mapper/vgdata-lvdata /data ext4 defaults 0 0xfs为例
[root@localhost ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 55G 0 disk
├─sda1 8:1 0 800M 0 part /boot
├─sda2 8:2 0 39.2G 0 part
│ ├─centos-root 253:0 0 52.2G 0 lvm /
│ └─centos-swap 253:1 0 2G 0 lvm [SWAP]
├─sda3 8:3 0 5G 0 part
│ └─centos-root 253:0 0 52.2G 0 lvm /
└─sda4 8:4 0 10G 0 part
└─centos-root 253:0 0 52.2G 0 lvm /
sdb 8:16 0 100G 0 disk
sdc 8:32 0 100G 0 disk
sdd 8:48 0 100G 0 disk
sr0 11:0 1 1024M 0 rom
[root@localhost ~]# pvcreate /dev/sdb
Physical volume "/dev/sdb" successfully created.
[root@localhost ~]# pvcreate /dev/sdc
Physical volume "/dev/sdc" successfully created.
[root@localhost ~]# pvcreate /dev/sdd
Physical volume "/dev/sdd" successfully created.
[root@localhost ~]# vgcreate vgdata /dev/sdb
Volume group "vgdata" successfully created
[root@localhost ~]# vgs
VG #PV #LV #SN Attr VSize VFree
centos 3 2 0 wz--n- <54.21g 0
vgdata 1 0 0 wz--n- <100.00g <100.00g
[root@localhost ~]# vgextend vgdata /dev/sdc
Volume group "vgdata" successfully extended
[root@localhost ~]# vgextend vgdata /dev/sdd
Volume group "vgdata" successfully extended
[root@localhost ~]# vgs
VG #PV #LV #SN Attr VSize VFree
centos 3 2 0 wz--n- <54.21g 0
vgdata 3 0 0 wz--n- <299.99g <299.99g
[root@localhost ~]# lvcreate -l 100%FREE -n lvdata vgdata
Logical volume "lvdata" created.
[root@localhost ~]# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
root centos -wi-ao---- <52.21g
swap centos -wi-ao---- 2.00g
lvdata vgdata -wi-a----- <299.99g
[root@localhost ~]# mkfs -t xfs /dev/vgdata/lvdata
[root@localhost ~]# mount /dev/vgdata/lvdata /data
[root@localhost ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs tmpfs 1.9G 12M 1.9G 1% /run
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/mapper/centos-root xfs 53G 3.2G 50G 6% /
/dev/sda1 xfs 797M 151M 647M 19% /boot
tmpfs tmpfs 378M 0 378M 0% /run/user/0
/dev/mapper/vgdata-lvdata xfs 296G 65M 281G 1% /data
[root@localhost ~]# vim /etc/fstab #末尾添加
/dev/mapper/vgdata-lvdata /data xfs defaults 0 0（2）扩容逻辑卷
方式一：扩容磁盘以扩容逻辑卷容量
其中一块磁盘扩容到200G 如何扩容逻辑卷
ext为例
root@localhost ~]# pvresize /dev/sdb
Physical volume "/dev/sdb" changed
1 physical volume(s) resized or updated / 0 physical volume(s) not resized
[root@localhost ~]# lvextend -l +100%FREE /dev/vgdata/lvdata
Size of logical volume vgdata/lvdata changed from <299.99 GiB (76797 extents) to <399.99 GiB (102397 extents).
Logical volume vgdata/lvdata successfully resized.
[root@localhost ~]# resize2fs /dev/vgdata/lvdata
resize2fs 1.42.9 (28-Dec-2013)
Filesystem at /dev/vgdata/lvdata is mounted on /data; on-line resizing required
old_desc_blocks = 38, new_desc_blocks = 50
The filesystem on /dev/vgdata/lvdata is now 104854528 blocks long.
[root@localhost ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs tmpfs 1.9G 12M 1.9G 1% /run
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/mapper/centos-root xfs 53G 3.2G 50G 6% /
/dev/sda1 xfs 797M 151M 647M 19% /boot
tmpfs tmpfs 378M 0 378M 0% /run/user/0
/dev/mapper/vgdata-lvdata ext4 394G 72M 375G 1% /data=xfs为例
[root@localhost ~]# pvresize /dev/sdb
Physical volume "/dev/sdb" changed
1 physical volume(s) resized or updated / 0 physical volume(s) not resized
[root@localhost ~]# lvextend -l +100%FREE /dev/vgdata/lvdata
Size of logical volume vgdata/lvdata changed from <299.99 GiB (76797 extents) to <399.99 GiB (102397 extents).
Logical volume vgdata/lvdata successfully resized.
[root@localhost ~]# xfs_growfs /dev/vgdata/lvdata
[root@localhost ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs tmpfs 1.9G 12M 1.9G 1% /run
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/mapper/centos-root xfs 53G 3.2G 50G 6% /
/dev/sda1 xfs 797M 151M 647M 19% /boot
tmpfs tmpfs 378M 0 378M 0% /run/user/0
/dev/mapper/vgdata-lvdata xfs 394G 72M 375G 1% /data方式二：新增磁盘以扩容逻辑卷容量
新增一块200G磁盘sde 如何增加到逻辑卷
ext为例
root@localhost ~]# pvcreate /dev/sde
Physical volume "/dev/sde" successfully created.
[root@localhost ~]# vgextend vgdata /dev/sde
Volume group "vgdata" successfully extended
[root@localhost ~]# lvextend -l +100%FREE /dev/mapper/vgdata-lvdata
Size of logical volume vgdata/lvdata changed from <499.99 GiB (127997 extents) to 699.98 GiB (179196 extents).
Logical volume vgdata/lvdata successfully resized.
[root@localhost ~]# resize2fs /dev/mapper/vgdata-lvdata
resize2fs 1.42.9 (28-Dec-2013)
Filesystem at /dev/mapper/vgdata-lvdata is mounted on /data; on-line resizing required
old_desc_blocks = 63, new_desc_blocks = 88
The filesystem on /dev/mapper/vgdata-lvdata is now 183496704 blocks long.
[root@localhost ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs tmpfs 1.9G 20M 1.9G 2% /run
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/mapper/centos-root xfs 53G 3.2G 50G 6% /
/dev/sda1 xfs 797M 151M 647M 19% /boot
tmpfs tmpfs 378M 0 378M 0% /run/user/0
/dev/mapper/vgdata-lvdata ext4 689G 69M 658G 1% /dataxfs为例
[root@localhost ~]# pvcreate /dev/sde
Physical volume "/dev/sde" successfully created.
[root@localhost ~]# vgextend vgdata /dev/sde
Volume group "vgdata" successfully extended
[root@localhost ~]# lvextend -l +100%FREE /dev/mapper/vgdata-lvdata
Size of logical volume vgdata/lvdata changed from <499.99 GiB (127997 extents) to 699.98 GiB (179196 extents).
Logical volume vgdata/lvdata successfully resized.
[root@localhost ~]# xfs_growfs /dev/mapper/vgdata-lvdata
[root@localhost ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs tmpfs 1.9G 20M 1.9G 2% /run
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/mapper/centos-root xfs 53G 3.2G 50G 6% /
/dev/sda1 xfs 797M 151M 647M 19% /boot
tmpfs tmpfs 378M 0 378M 0% /run/user/0
/dev/mapper/vgdata-lvdata xfs 689G 69M 658G 1% /data